#You have no USB connection to any mobile logger on 2019-11-23 17:53:30.498
#You are now connected to USB@/dev/ttyACM0 on 2019-11-23 17:53:38.985
17:53:38.994>Scanning...
>I2C device found address 0x27
>I2C LCD Set at address 0x27
>Done!
>
17:53:40.064>System started
17:53:42.407>pH Calibration parameters:
>pH=4 offset:-1.64 -0.98 -0.59 0.19  
>pH=10 offset:-0.87 0.34 0.35 0.63  
>O2 calibration parameters:17.30 21.20 18.30 20.70  
>O2 measurement enabled=0.00
17:53:43.445>Initializing SD card...
17:53:45.479>initialization done.
>LOGSET1.TXT		49
>GP4GAS.TXT		634853
>GP3PH.TXT		696562
>GP4PH.TXT		696298
>LOGSET1.HTM		400
>GP1GAS.TXT		632109
>LOGS1TH.TXT		502840
>GP2GAS.TXT		640099
>GP3GAS.TXT		640099
>GP1PH.TXT		685439
>GP2PH.TXT		697531
>GP2CO2.TXT		640765
>GP3CO2.TXT		624369
>GP4CO2.TXT		625383
>GP1CO2.TXT		642257
>GP1V.TXT		132
>GP2V.TXT		170
>GP3V.TXT		136
>LOGSET2.TXT		2
>LOGS2TH.TXT		790463
>LOGSET2.HTM		381
>GP1O2.TXT		472455
>GP2O2.TXT		477283
>GP3O2.TXT		478522
>GP4O2.TXT		481358
>LOGSET3.TXT		49
>LOGSET3.HTM		387
>LOGS3TH.TXT		424226
>done!
17:53:47.727>Writing to file: Logset2.txt
17:53:47.839>done.
>Type 't' to test/calibrate various sensors
>webserver ...
17:53:53.205>server is at 
>202.45.51.244
>DHCP Success
>17:53:52 23-11-2019
17:54:16.774>Setup completed!
17:54:52.417>Gp4Gas.txt sensor: 72, 23-11-2019,  17:54:50, 466
17:54:56.326>Gp4O2.txt sensor: 76, 23-11-2019,  17:54:54,